Zareba Home Page


Installation FAQ
   
   
   
     
  CUSTOMER SUPPORT
   
INSTALLATION INFORMATION
   
  INSTALLATION FAQ
  INSTALLATION PARTS LIST
   
TROUBLESHOOTING
   
WARRANTY INFORMATION
     

   
 

Common questions about electric-fence installation

The following questions compose the majority of calls made to our customer-support staff. If you don't find your question listed or you need more information, please contact

Zareba customer service
Phone: 507 684-3721
Fax: 507 684-3722
Email: info@zarebasystems.com

How do I start building my electric fence?

How do I choose and electric fence controller?

What is the most common installation error with electric fencing?

My climate and soil make it difficult for me to install a good grounding system. What alternatives do I have?


How do I start building my electric fence?

We recommend starting with our Do-It-Yourself Fence Planning Guide. This in-depth manual walks you through each step of planning your electric fence. We also recommend using our Fence Builder™ planning tool to help you determine the type of fence and calculate the quantities and kind of components you'll need. For best results, we recommend that you buy the most powerful controller that you can afford; make certain you install a good grounding system; use high-quality wires, connectors, and insulators; and service the fence regularly.

How do I choose and electric fence controller?

The fencer you choose depends on many variables, including the type of animal being controlled, the length of the fence, its location, and even the climate (wet climates can drain energy from the fence and dry climates can cause grounding problems). To simplify your decision, use the charts on pages 5 - 8 of the Do-It-Yourself Fence Planning Guide or use the Fence Builder™ planning tool. In general, choose the most powerful fencer that you can affordto handle unexpected challenges and to allow for expansion of your fence.

What is the most common installation error with electric fencing?
Poor or improper grounding accounts for 95 percent of all electric-fencing problems. For best results, use three six-foot-long galvanized grounding rods spaced ten feet apart. Make sure to use ground-rod clamps to attach the ground wire. The drier the soil, the better the grounding system needs to be. For more information, see the Grounding Specifications section in the Zareba Installation Manual.

My climate and soil make it difficult for me to install a good grounding system. What alternatives do I have?
In very dry climates (with dry sandy soil) and cold climates (with snow-covered or frozen soil), the typical ground system may not deliver an adequate shock. You can overcome this problem by running a ground wire parallel to the hot wires and grounding it every 1,300 feet with 6-foot galvanized-steel or copper ground rods. Such a fence will no longer depend on moist soil conditions; when an animal touches the hot and ground wires simultaneously, the current will travel back to the fence-controller's ground system, completing the circuit and delivering a shock.

For more information, please refer to the Zareba installation manual.
 

 

http://www.zarebasystems.com
Copyright © 2004 Zareba Systems. All rights reserved.